Angelcare AC1120 - Manual (Page 10)

the video monitor function is activated when you receive
your Angelcare
® Monitor. if you wish to disable this
function, press the Video icon then press oK to confirm
the setting.
1. the Video icon will appear on the lCd screen when
the video function is off.
2. to retrieve the video monitor function, press the
MenU icon at the right bottom of the screen to go into
the MAin MenU, then press the Video icon.
3. press the oK to confirm the setting.
MenU icon
Video icon
Video
iCon
1.2 VIDEO
IMPORTANT NOTE : Press the OK icon to confirm all
settings and adjustments done on the MAIN MENU.
when the screen remains idle for 1 minute, it will
automatically return to video display. in such a case, any
changes made will not be saved.
Note: when you are using the MAin MenU screen, the
sound transmission from the nursery Unit to the parents
Unit is temporarily deactivated.
To access the MAIN MENU screen - touch the MENU
icon located at the bottom right corner of the
screen.
Up
down / MUte
tAlK-BACK
sound transmission from the nursery Unit can be on or
off.
1. press sound icon to activate or deactivate.
2. press oK to confirm setting.
• Adjust the sound level with the Up (+) and down (-)
buttons.
• press and hold the down (-) button for at least 2
seconds to MUte the sound.
• press and hold the tAlK-BACK button to talk to your
baby.
Note : When the sound is on MUTE the icon on the
top bar will appear with a “X”.
soUnd
iCon
sound on MUte
1. MAIN MENU SETTINGS
INSTRUCTIONS
1.1 SOUND
10
AC1120 UK A5 05.15.2012 12-05-15 8:12 AM Page 10