Angelcare AC1120 - Manual (Page 12)

the Vox function is the sound reception on “voice
activated mode”. the microphone sensitivity can be
adjusted as follows: A low Vox microphone sensitivity
means that the sound from the baby’s room has to be
louder to trigger sound transmission to the parents
Unit.
1. press the sUB-MenU icon.
2. press on VoX icon to activate or deactivate.
3. press the microphone sensitivity key to the desired
level 1 (lowest) to 4 (highest).
4. press oK to confirm and return to the MAin MenU.
Note : if VoX is turned off, the sound reception will be
continuous.
Vox sensitivity levels.
2.2 VOX ADJUSTMENT
2. SUB-MENU SETTINGS
IMPORTANT NOTE : Press the OK icon to confirm all
settings and adjustments done on the SUB-MENU.
when the screen remains idle for 1 minute, it will
automatically return to video display. in such a case, any
changes made will not be saved.
Note: when you are using the sUB-MenU screen, the sound
transmission from the nursery Unit to the parents Unit is
temporarily deactivated.
To access the SUB-MENU screen - touch the SUB-MENU
icon located at the bottom right corner of the MAIN
MENU screen.
the screen saver mode can be triggered manually by pushing
the parents Unit power key or can be set on automatic mode.
1. press sUBMenU icon.
2. press the sCreen sAVer icon to select the automatic
mode.
3. press “-” or “+” to select 5, 10, 15 or 20 seconds which
represent the delay before it goes in screen saver mode.
you can select off which means no delay.
4. press oK to confirm and return to MAin MenU.
5. when video is on screen saver Mode, the sCreen sAVer
icon will appear in the middle of the screen. push the
icon to go back to the camera caption.
Note : do not push the power key for more than 2 seconds
since this will shut down the parents Unit.
POWER key
INSTRUCTIONS
2.1 SCREEN SAVER SETTINGS
press on VoX icon to activate or
deactivate the voice activated
mode.
12
AC1120 UK A5 05.15.2012 12-05-15 8:12 AM Page 12