Axiomtek IPC932-230-FL-ECM - Manual (Page 27)

IPC932-230-FL Series U ser’s Manual
Hardware Installation 19
2.2 Installing the Memory Module
Step 1 Turn off the system.
Step 2 Disconnect the power connector.
Step 3 Loosen screws to remove the Heatsink cover from the chassis.
Step 4 Install the memory module into the socket and push it firmly down until it is fully
seated. The socket latches are clipped on to the edges of the SO-DIMM.
Step 5 After install the ram module, please close the Heatsink cover back to the chassis
and fasten all screws.