Installing the hard disk drive, 3 installing the hard disk drive – Axiomtek IPC932-230-FL-ECM User Manual
Page 28
IPC932-230-FL Series U
ser’s Manual
Hardware Installation
20
2.3 Installing the Hard Disk Drive
The IPC932-230-FL Series offers a convenient drive bay module for users to install
HDD. The system offers users two 2.5
” Hard Disk Drive for installation. Please follow
the steps:
Step 1 Turn off the system.
Step 2 Disconnect the power connector.
Step 3
Loosen screws to remove the top cover from the chassis.
Step 4
Open the top cover and locate the Hard Disk Drives as red marked.
Step 5 There is a thermal pad and 2 x HDD brackets in th e accessory box, please
sticker the HDD Mylar before assembly the HDD with the bracket.
Step 6
Insert the HDD module into the HDD socket.
Step 7
Close the HDD top cover back to the chassis and fasten all screws.