Axiomtek IPC932-230-FL-ECM - Manual (Page 29)

IPC932-230-FL Series U ser’s Manual
Hardware Installation 21
2.4 Installing the PCI or PCIe Card
IPC932-230-FL provides one PCIex1 and one PCIex4 or 1 PCI & 1 PCIex4 for expansion. The
procedurof installing the PCI / PCIe expansion card into IPC932-230-FL is instructed below.
Step 1 Turn off the system.
Step 2 Disconnect the power connector.
Step 3 Loosen screws to remove the top cover from the chassis. Removing the PCI or PCIe
bracket by releasing the button as marked.
Step 4 Locate the PCI or PCIe slots.
Step 5 Align the PCI or PCIe card with the slot, and press the card into the slot until it is
firmly seated.
Step 6 Close the top cover back to the chassis and fasten all screws.