Babbitt Liquid Level Gauge - Manual (Page 6)

ROUTINE MAINTENANCE (cont.)
6. Check the stainless steel pipe clamps to insure they are tight and adjust the scale
holder up or down on the float chamber to make sure the positive zero is correctly
positioned.
7. Use a permanent magnet or a magnet tool from Babbitt to attract the red “bird” until it
is again coupled to the float inside the chamber.
LG SERIES PARTS LIST
When ordering replacement parts for Babbitt Gages, the following information is required:
a. Serial number of gage or accessory item
b. Description of item
c. Original purchase order if possible
A. TYPICAL FLOAT CHAMBER PARTS
1. Vent plug and spring
2. Drain flange and spring
3. Drain plug
4. Magnetized float
5. Top float spring
6. (Style A Only) Float stop plates with spring
B. INDICATOR SCALE ASSEMBLY
1. Scale/Channel Assembly
2. Indicator Tube (glass or polycarbonate)
3. Pipe Clamps
4. Name Plate
5. Indicator tube mounting blocks (top and bottom)
C. FLIPPER/ROLLER OPTION
TERMS & CONDITIONS OF SALE
1. All orders should be entered as follows:
Babbitt International, Inc.
P. O. Box 70094
Houston, TX 77270