Bimba SPCS - Manual (Page 15)

2014.01.23 rev4 15
4. Appendix - Auto Com Port Detection
Step 1: How to Install/Detect the SPCS Communication Drives
a. Click the Start Menu. b. Then click “Control Panel”.
c. Double Click on the “Device Manager”. d. This will open the Device Manager Window. (The SPCS
drivers are located under Ports (COM & LPT) or Universal
Serial Bus controllers.
e. To detect any issues, look for devices in the Device
Manager that have an icon similar to the following (USB
with yellow exclamation mark signifying that the driver
is not recogonized). If no issues are detected, please
continue to Step 2.
f. Once the faulity driver has been identified, right click on
the driver (shown in blue) then left click on “Properties”.