Bimba SPCS - Manual (Page 19)

2014.01.23 rev4 19
Notice & Warranty
Preface
Data, Illustrations, Alterations
Data and Illustrations are not binding. Bimba reserves the right to alter products in line with our policy of
continuous product development.
Use and purchase of this product is subject to Bimba Mfg. Terms and Conditions of Sale and Use.
Improper installation or use voids warranty. Consult factory regarding special applications. Specifications
are subject to change. Reasonable efforts have been made to provide useful and correct information in
this document, but this document may contain errors and omissions, and is subject to change.
Contact: Bimba Manufacturing Customer Support 800-44-Bimba or [email protected] or your local Bimba
Distributor for additional information.
Microsoft are registered trademarks of Microsoft Corporation; Windows is a brand name of the Microsoft
Corporation in the USA and other countries.
Bimba is a registered trademark of Bimba Manufacturing Company.
Copyright
All rights are rserved. No part of this document may be reproduced or transmitted in any form or by any
means, electronic or mechanical, including copying, processing or online file transfer, without permission
in writing by Bimba Manufacturing Company. You are not authorized to translate this document into any
other language.
2014 Bimba Manufacturing Company. All rights reserved.
WARNING:
I nstallation and operation of electric and high pressure systems (fluids and compressed gas) involves risk
including property damage and personal injury or death.
Installers and users should be properly trained or certified and take safety precautions. This product may
cause death, personal injury, or property damage if improperly used or installed.
The information in this document and other information from Bimba Mfg. and its authorized representatives
are intended for use by persons having technical expertise in selecting and using these products. Product
owners (“you”) should analyze all technical and safety requirements of your specific application, including
the consequences of any possible failure, before selecting a product. This product may not be suitable
for all applications, such as those acting upon people. Suitability is solely your responsibility. Because the
requirements for each application may vary considerably, you are solely responsible for conducting any
testing or analysis that may be required to determine the suitability of the product for your application, and
to ensure that all performance, safety and warning requirements for your application are met.
While this product is low voltage, it contains open-frame electronic components and care should be taken
to prevent un-intentional contact with the productt to avoid damage to the person or property.
Warranty:
This product is covered by a one year Bimba Mfg. limited warranty. Use without a coalescing filter voids the
warranty. Contact Bimba Mfg. or visit website for more details.