Chicago Gaming Medieval Madness Remake - Manual (Page 80)

Power Supply Board
CR1: Knocker, flashes when knocker fires
CR2: Shaker, on when shaker motor is running
CR5: 50V, normally on
CR12: 12VUR, normally on
Solenoid Driver Board
CR1 : 12V, normally on
CR2 : SOL 1-4, normally on when coin door closed
CR 3: SOL 5-6, normally on when coin door closed
CR 4: SOL 7-8, normally on when coin door closed
Playfield Board
CR1: 12V, Normally on
CR2: VCC, normally on
CR3: 3.3V, normally on
CR6: 6V, normally on
CR7: DIA, normally flashes
CR8: +5V, normally on
1-5 6
LED List
Power Supply
Board
Controller Board
Playfield Board
Solenoid Driver
Board
Controller Board
CR2: 12V, normally on
CR3: 3.3V, normally on
CR5: 5V, normally on
CR7: Amp Fault, normally off
CR8: Heartbeat, flashes normally
CR9: Blank, normally off. Yellow ON
indicates blank is active.
CR10: Reset, normally off. Flashes red
on boot and when watchdog hits reset.