Cino L780BT HC - Manual (Page 62)

W
ir
eless FuzzyScan
R
efer
ence Man
ual
Configure Your FuzzyScan
55
PROGRAM
Operation Control
♦ Presentation Scanning Setting, Laser Aiming Control ♦
F_DEFAULT
Family Code Selection P.C Parameter Selection Option Code
SmartStand Power Off Timeout SS
SS
SS 3 mins
5 mins
10 mins
Only available for FuuzzyScan Laser model 0
1
2
Presentation Auto-sense SS
SS Disable
Enable 0
1
Presentation Sensitivity SS
SS
SS
SS
SS Level 1
Level 2
Level 3
Level 4
Level 5 Level 6
Level 7
0
1
2
3
4 5
6
Laser Aiming Control SS
SS Disable
Enable
Only available for L series laser imaging scanner. 0
1
The SmartStand Power Off Timeout is a pre-defined duration for scanner’s light source on time when the scanner is placed on SmartStand. While the scanner is placed
on SmartStand, the scanner’s will be switched from hand-held scanning to presentation scanning and the light source will be forced on automatically. The light source will
be off when the pre-defined duration is up.
When enable the Presentation Auto-sense, the scanner can be switched between hands free scanning and hand-held scanning automatically when working with the
SmartStand or cradle.
The Presentation Sensitivity is used to configure the sensitivity level when the scanner is set as presentation mode. The higher lever means higher sensitivity for detecting
the barcode.
You can disable or enable laser aiming line when you scan PDF barcode.