Cino PL680BT HC - Manual (Page 8)

7
Use FuzzyScan in SPP Mode
Establish SPP Master Connection
Please go to the folder “Hardware” located in Bluetooth Advanced
Setting of the remote host device to check its device MAC address. Then
prepare a 12-character Code 128 barcode of the remote host device
MAC address, or follow the step 4 to input MAC address by scanning 12
option codes.
Ensure a virtual COM port is available in your remote host for connecting
the scanner. If not, please go to the folder “Local Services” located in
Bluetooth Advanced Setting. Click the “Add Serial Services” to add one
more Bluetooth COM port.
Power on or wake up the scanner by pressing the Trigger key if the
scanner is power-off or in sleep state and ensure the status indicator of
scanner blinks red and green alternatively (in “Uninstall” state). If the
scanner is not in uninstall state, please scan the “Uninstall” command first,
then scan the “SPP Master Mode” command. The status indicator of
scanner will turn steady red immediately.
Uninstall
SPP Master Mode
Scan the 12-character MAC address barcode. The scanner will emit
continuous short clicks and link indicators of the scanner will blink blue
quickly during the radio connecting process. If the Passkey (PIN) is
requested, please enter “00000000” (default setting).
The scanner will emit 4 beeps in ascending tone to indicate the radio is
connected. Meanwhile, the link indicators of scanner will blink blue once
per 2.5 seconds to indicate the scanner is in radio-connected state.
Please note that if the scanner failed to connect to the host device within
30 seconds, the link indicators will blink blue 3 times per 2 seconds.
But the scanner is still continuing to discover the host device for another
30 seconds before go to sleep. In the interim, you still can scan “Uninstall”
command to resume the scanner to uninstall state. If the scanner went to
sleep already, you can just press the trigger to wake up the scanner to
continue the installation.
The above procedures are based on Windows environment. But the
installation procedure may vary depending on different remote host
devices, operating systems and the Bluetooth drivers. Please consult
your professional IT consultant to obtain necessary support if any
problem has been encountered during the installation processes. For
more detailed information, please visit CINO website.