ClassCo Jumbo Screen Caller ID ML300 - Manual (Page 2)

1. M e s s a g e Wa i t i n g L i g h t
Indicator (red LED) - lights up
steadily when you have new
voice mail messages.
2. New Call Light Indicator
(green LED) - lights up steadily
when new calls are received.
3. Visual Display Panel - shows
the caller’s name and / or
number, incoming call time &
date, Call Counter, New Call
icon (NEW) and Voice Mail icon
(
).
4. [DIAL VM] Buttons - dials to
your voice mail access number.
5. [DELETE] Button - deletes
Caller ID records.
6. [REVIEW ] / [REVIEW ]
Buttons - views the Caller ID
records.
7. [DIAL] Button - dials the
number shown on the display.
You also use this button to set
language, area code, time and
date and LCD display contrast.
8. [FLASH] Button - activates 3-
way conference or Call Waiting
calls.
9. TELEPHONE Jack - connect
line cord from your telephone
into the jack labeled PHONE at
the back of ML-300ad.
10. TEL LINE Cord Jack - insert
one end of the telephone line
cord into the jack labeled TEL.
LINE and the other end into your
wall jack.
11. DC Jack - the AC adaptor must
be connected for the ML-300ad
to operate. Plug the adaptor
into the DC 9V jack at the back.
Control Location
6
1 2
3
4
5
7
8
9 10 11
DELETE DIAL VM REVIEW DIAL FLASH
MSG NEW
3
THE AC POWER ADAPTOR
THAT COMES WITH ML-300ad
IS R EQ U IR ED FO R TH E
OPERATION OF THE UNIT.
H O W E V E R , I T I S
RECOMMENDED TO INSTALL
4 X AAA SIZE BATTERIES TO
PREVENT LOSS OF MEMORY
WHEN THERE IS A POWER
FAILURE.
Please check to be sure all supplied
accessories come with ML-300ad.
If there is anything missing or visible
damage, please contact the original
place of purchase. Do not attempt
to operate ML-300ad if it is damaged.
a) ML-300ad unit 1 pc
b) Stand studs 2 pcs
c) AC power adaptor 1 pc
d) Long phone line cord 1 pc
e) Short phone line cord 1 pc
INSTALLING BATTERIES
Please install 4 x AAA batteries
( a l k a l i n e b a t t e r i e s a r e
recommended) to retain the Caller
ID records and keep real time clock
running in case there is a power
failure.
IMPORTANT :
a)
Use only fresh batteries of the
r e q u i r e d s i z e a n d
recommended type.
b) Do not mix old and new
batteries, different types of
batteries (standard, alkaline or
rechargeable) or rechargeable
batteries of different capacities.
c) When replacing the batteries, if
you do not install the new
batteries within one minute after
removing the old ones, you may
lose all information stored in
your unit.
d) If you do not plan to use your
unit with batteries for a month
or longer, remove the batteries.
Batteries can leak chemicals
that can destroy electronic parts.
e) D i s p o s e o f o l d b a t t e r i e s
promptly and properly. Do not
burn or bury them.
Installation
4