ClassCo Jumbo Screen Caller ID ML300 - Manual (Page 5)

CALLER ID MEMORY
If you have subscribed to the Caller
ID service from your local telephone
company, your ML-300ad will receive
and display incoming caller’s name
(if applicable) and number together
with the date and time of the call. It
stores up to 90 records, each of
which contains up to 14-digit number
and 15-character name.
When the Caller ID memory is full,
the oldest Caller ID record will be
deleted automatically to make room
for the new one.
REVIEWING CALLER ID
1. Press [REVIEW ] button to
view the Caller ID record from
the newest call (i.e. #90) to the
oldest (#01)..
2. Press [REVIEW ] button to
view the Caller ID record from
the oldest (#01) to the newest
(i.e. #90).
Note :
a) In some areas, Caller ID
information may not be available.
“ U N K N O W N N A M E ” o r
“UNKNOWN CALL” will be
shown on the LCD display in
such cases.
b) Callers have the option to block
their Caller ID information.
“PRIVATE NAME” or “PRIVATE
CALL” will be shown on the LCD
display in such cases.
c) If the area code of a caller’s
number matches your pre-set
local area code, only the last 7
digits will be shown on the LCD
display. (refer to the “Set Area
Code” section on page 8)
12:00AM 01/01 CALL #80 NEW
C.W. 249-342-363
JOHN SMITH
Time and date
when this call was
received.
Sequence
number of this
incoming call
It is a new call
You have new
voice mail
message(s)
It is a waiting call
Caller's name
Caller's number
Operation
9
NEW CALL LIGHT
INDICATOR (Green)
When ML-300ad receives a new
incoming call, the new call icon
“NEW” appears on the LCD display
and the New Call Light Indicator
(Green LED) lights up steadily.
Besides, the LCD display shows the
information of the new incoming call
for about 10 seconds and then
returns to the idle mode.
Note :
a)
You or your answering machine
must answer the new incoming
call only after the first ring.
Otherwise, the information of
the new incoming call will not
be registered.
b) If the AC adaptor is not
connected, the New Call Light
Indicator will flash every 3
seconds when there is new call
not yet reviewed.
c) The New Call Light Indicator
does not stop lighting up unless
you have reviewed ALL new
incoming calls by pressing
[REVIEW
] or [REVIEW ]
button.
VOICE MAIL
If you have subscribed to Voice Mail
service from you local telephone
company, the Message Waiting Light
Indicator lights up steadily when you
have voice mails in your mailbox, and
the LCD icon (
) appears on the LCD
display. After you have listened to your
voice mails, the Message Waiting
Light Indicator and the LCD icon (
)
will turn off.
To listen to your voice mails, press
[DIAL VM] button to dial your voice
mail access number. The LCD display
shows "PICK UP HANDSET". Then,
lift the Handset to dial the access
number.
Refer to the "Set DIAL VM" section on
page 9 to set the voice mail access
number.
IMPORTANT :
a)
If the AC adaptor is not connected,
the Message Waiting Light
Indicator will flash every 3
seconds when you have new voice
mail(s).
b) If there is more than one phone
connected to the line in your
house, ML-300ad will not receive
Call Waiting information when any
of the other phones are off-hook
at the same time.
c) If the Message Waiting Light
Indicator keeps on lighting up and
the LCD icon (
) still appears
after you have listened to all your
voice mails, press [DELETE]
button to turn off the light and the
LCD icon.
Operation
10