Clay Paky A.LEDA B-EYE K20 - Manual (Page 21)

21 A.LEDA B-EYE
Standard: Pan & Tilt are simultaneously reset.
Sequenced: Tilt is reset first followed by Pan.
3) Press F to confirm the selection or LEFT D to keep the current setting.
Pan Home Def Pos
Lets you assign the Pan channel “home” position at the end of Reset,
without a DMX input signal.
1) Press
F , the current setting appears on the display.
2) Use the UP B and DOWN C keys to select one of the following
settings:
0 degree
90 degrees
180 degrees
270 degrees (default)
3) Press F to confirm the selection or LEFT D to keep the current setting.
Tilt Home Def Pos
Lets you assign the Tilt channel “home” position at the end of Reset,
without a DMX input signal.
1) Press
F , the current setting appears on the display.
2) Use the UP B and DOWN C keys to select one of the following settings:
0%
12.5%
25%
50% (default)
75%
87.5%
100%
3) Press F to confirm the selection or LEFT D to keep the current setting.
SILENT MODE
It lets you select the “Silent Mode” from the two available.
1) Press
F the current setting appears on the display.
2) Use the UP B and DOWN C keys to select one of the following settings:
Standard: Maximum speed and consequently maximum effects/fans
noise level.
Quiet: Regulates the speed of the effects (Pan, Tilt, Zoom, Zoom rotation) and
of the fans thereby reducing their noise level.
3) Press F to confirm the selection or LEFT D to keep the current setting.
DISPLAY
Used for automatically reduce brightness on the display after about 30
seconds in idle.
1) Press
F - the current settings appear on the display (On or Off).
2) Use the UP B and DOWN C keys to enable (On) or disable (Off)
the decreasing of display brightness.
3) Press F to confirm the selection or LEFT D to keep current settings.
FAN SPEED MODE
Allows you to set how to manage the fan speed of the head of the fixture,
select between the two available:
• Auto: the head’s fan varies the speed depending on the temperature
detected on the LED.
• Full: the head’s fan is always at full speed.
SPECIAL FUNCTIONS
Pan / Tilt speed
Lets you select two different Pan and Tilt speeds.
1) Press
F - the current setting appears on the display.
2) Use the UP B and DOWN C keys to select one of the following settings:
- Normal
- Fast
3) Press F to confirm the selection or LEFT D to keep current settings.
Dimmer Curve
Lets you select four different Dimmer channel curves.
1) Press
F - the current setting appears on the display.
Pan Home
Def Pos
Tilt Home
Def Pos
Silent
mode
Standard
Quiet
On
Off
Display
Auto
Full
Fan Speed
Mode
Dimmer
Curve
Special
Functions
Pan / Tilt
speed
Continue ➔