Clay Paky ALPHA SPOT QWO 800 “ST” User Manual
Page 20
20
ALPHA SPOT QWO 800 &
“
ST
”
MACRO EFFECTS
It lets you select the “Macro Effects” set up from the two available.
1) Press
F
the current setting appears on the display.
2) Use the UP
B
and DOWN
C
keys to select one of the following settings:
Macro group size
It lets you set the number of projectors to be included in the macro mode
operation.
1) Press
F
2) Use the UP
B
, DOWN
C
, RIGHT keys to set the number of projectors
to be included in the “Macro Effect” operation.
3) Press
F
to confirm the selection or LEFT
D
to keep the current setting.
Macro fixture Id
It lets you attribute an ID address to the projector for the phase
displacement for the scene’s starting time in Macro mode.
1) Press
F
2) Use the UP
B
and DOWN
C
keys to select one of the following settings:
Fixed to X. (to assign to all the projectors to be included in the Macro
operation). Auto by DMX Address: According to the DMX address, it
automatically detects the starting sequence of the scene in the Macro
mode (to assign to all the projectors to be included in the Macro operation).
3) Press
F
to confirm the selection or LEFT
D
to keep the current setting.
DISPLAY
Used for automatically reduce brightness on the display after about 30
seconds in idle.
1) Press
F
- the current settings appear on the display (On or Off).
2) Use the UP
B
and DOWN
C
keys to enable (On) or disable (Off) the
decreasing of display brightness.
3) Press
F
to confirm the selection or LEFT
D
to keep current settings.
SETTING
Used to save 3 different settings of the items in the options menu and
relative submenus.
1) Press
F
- “Default preset” appears on the display.
2) Use the UP
B
and DOWN
C
keys to select one of the following
configurations:
- Default preset (*)
- User preset 1
- User preset 2
- User Preset 3
3) Press
F
- “Load preset X” appears on the display.
4) Use the UP
B
and DOWN
C
keys to select:
- Load preset X to recall a previously stored configuration.
- Save to preset X to store the current configuration.
a confirmation message (Are you sure?) appears on the display.
5) Select YES to confirm the selection or NO to keep the current setting
and return to the next higher level.
(*) DEFAULT PRESET
By pressing the RIGHT
E
key and the LEFT
D
key simultaneously
once entered in the "main menu" it is possible to quickly (short cut)
reset the default settings (DEFAULT PRESET).
Used for restoring default values on all options menu items and relevant submenus.
1) Press
F
, a confirmation message (Are you sure?) appears on the display.
2) Select YES to confirm the selction or NO to keep current setting.
OPTION
DEFAULT
Lamp DMX
On
Invert Pan
Off
Invert Tilt
Off
Swap Pan-Tilt
Off
Encoder Pan-Tilt
On
P/T Homing Mode
Standard
Pan Home Def Pos
270 degrees
Tilt Home Def Pos
50%
Color mixing
CMY
Color mixing curve
Curve 2
Fixed Wheel Shortcut
On
Macro Color Adjustment
On
Shutter on error
Off
Dimmer on Shutter
Off
Auto-focus mode
Limited zoom range
Display
On
On
Off
Display
Macro
Effects
Macro fixture Id
Macro group
size
Save To
Preset 3
Reset To
Dafault
Go Back
Setting
Default
Preset
Load
Preset 1
Save To
Preset 1
User
Preset 1
Load
Preset 2
Save To
Preset 2
User
Preset 2
Load
Preset 3
User
Preset 3