Dolby Laboratories DP524 - Manual (Page 10)

1-4
1.5 Regulatory Notices
FCC
This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with this
instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his
or her own expense.
UL
Troubleshooting must be performed by trained technicians. Do not attempt to
service this equipment unless you are qualified to do so.
WARNING: Check that the correct fuses have been installed. To reduce the risk of
fire, replace the fuses only with the same type and rating.
Exposed portions of the power supply are electrically "hot". In order to reduce the
risk of electrical shock, the power cord MUST be disconnected when the cover of
this equipment is removed.
UK
Connections for the United Kingdom:
WARNING: THIS APPARATUS MUST BE EARTHED
As the colours of the cores in the mains lead may not correspond with the coloured
markings identifying the terminals in your plug, proceed as follows:
•
The core which is coloured green and yellow must be connected to the
terminal in the plug which is marked with the letter E or by the earth symbol
or coloured green or green and yellow.
•
The core which is coloured blue must be connected to the terminal which is
marked with the letter N or coloured black.
•
The core which is coloured brown must be connected to the terminal which is
marked with the letter L or coloured red.
MAIN