Dolby Laboratories DP524 - Manual (Page 5)

TABLE OF CONTENTS
SECTION 1 Introduction
1.1 Introduction ................................................................................................... 1-1
1.3 Dolby AC-3 and AC-2................................................................................... 1-2
1.4 Data Rates, Sample Rates and Channels ....................................................... 1-3
1.5 Regulatory Notices ........................................................................................ 1-4
SECTION 2 Applications
SECTION 3 Pre-Installation
3.1 Unpacking...................................................................................................... 3-1
3.2 Inspection ...................................................................................................... 3-1
3.2.1 Claims for Shipping Damage ...................................................... 3-1
3.3 Fusing Information ........................................................................................ 3-1
Main Fuse ................................................................................................ 3-1
Internal Fuse ............................................................................................ 3-2
3.4 Configuring Jumper Settings......................................................................... 3-2
3.4.1 Jumpers for Encoded Data In & Timing (J103) ............................ 3-4
Receive Timing / Receive Data Termination .............................. 3-4
Request to Send / Terminal Ready Enable .................................. 3-4
3.4.2 Signal Ground-to-Chassis Link ................................................... 3-4
3.5 Configuring the Rear Panel DIP Switch S101............................................... 3-4
3.5.1 Switch nos. 1, 7 & 8 - Test Tone................................................. 3-5
3.5.2 Switch nos. 2, 5 & 6 Software Download .................................. 3-5
3.5.3 Switch no. 3 - Digital Output Format Selection .......................... 3-6
3.5.4 Switch nos. 4, 5 & 6 - Command/Aux Data................................ 3-6
SECTION 4 Installation
4.1 Mounting ....................................................................................................... 4-1
4.2 Audio Connections ........................................................................................ 4-1
4.2.1 S/PDIF Output - J102 .................................................................. 4-1
4.2.2 AES/EBU Output - J101 ............................................................. 4-1
4.2.3 Analog Outputs - J106/7.............................................................. 4-1
4.3 Data, Status, and Remote Control Connections ............................................ 4-2
4.3.1 Encoded Data In & Timing - J103............................................... 4-2
4.3.2 RS-232 (J105).............................................................................. 4-2
4.3.3 RS-422 (J106).............................................................................. 4-3
4.3.4 Parallel Status and Control (J104)............................................... 4-3
SECTION 5 Operation
5.1 Front Panel Status Indicators......................................................................... 5-1
5.2 Rear Panel Level Controls............................................................................. 5-2
5.3 Test Tone Level ............................................................................................. 5-2
5.4 Software Downloading Procedure................................................................. 5-2
MAIN