Dolby Laboratories HT2030 - Manual (Page 23)

SYSTEM SETUP
23
DVD Setup (Continued)
Initial Settings
Follow these guidelines to set your personal prefer-
ences for DVD operation.
Initial Settings Overview
11
Press SETUP.
The Setup menu appears.
22
Press 3 3 /4 4 to select the desired item.
The screen will show the current setting for the
selected item, as well as alternate setting(s).
33
While the desired item is selected, press 2
2
, then
3 3
/4
4
to select the desired setting.
44
Press SELECT/ENTER to confirm your selection.
Some items require additional steps.
55
Press SETUP, RETURN, or PLAY (H H ) to exit the
Setup menu.
Language
Disc Language
Set your desired Disc Menu, Audio, and Subtitle lan-
guages.
Original : Selects the disc’s default language.
Other : To select another language, use the number keys to
enter the corresponding 4-digit number according to the lan-
guage code list on page 41. If you enter the wrong language
code, press CLEAR.
Menu Language
Select a language for the Setup menu. This is the menu
you see when you press SETUP.
Picture
TV Aspect
4:3 Letterbox: Select when a standard 4:3 TV is con-
nected. Displays movies with masking bars above and
below the picture.
4:3 Panscan: Select when a standard 4:3 TV is con-
nected. Crops movies to fill your TV screen.
16:9 Wide: Select when a 16:9 widescreen TV is con-
nected.
Progressive Scan
Progressive Scan Video provides the highest quality
pictures with less flickering.
If you are using the COMPONENT VIDEO OUT/PRO-
GRESSIVE SCAN jacks, but are connecting the DVD
Player to a standard (analog) television, set Progressive
Scan to Off.
If you are using the COMPONENT VIDEO OUT/PRO-
GRESSIVE SCAN jacks for connection to a TV or moni-
tor that is compatible with a progressive scan signal, set
Progressive Scan to On.
otes
– Progressive Scan only works when the VIDEO OUT-
PUT switch on the rear panel is set to COMPO-
NENT/PROGRESSIVE SCAN.
Caution
If Progressive Scan is set to On, an image will only be
visible on a progressive scan compatible TV or monitor.
If you set Progressive Scan to On in error, you must
reset the unit. Press STOP (x) to stop any disc that is
playing. Next, press STOP (x) again and hold it for five
seconds before releasing it. The video output will be
restored to the standard setting, and a picture will once
again be visible on a conventional analog TV or monitor.
DVD
DVD
DVD
Disc Subtitle
Disc Menu
Rating
Country Code
TV Aspect
Menu Language
Progressive Scan
PBC
Disc Audio Original
Spanish
English
Chinese
Polish
Hungarian
Russian
French
German
Italian
Other — — — —
Disc Subtitle
Disc Menu
Rating
Country Code
TV Aspect
Menu Language
Progressive Scan
PBC
Disc Audio English
Spanish
French
Disc Subtitle
Disc Menu
Rating
Country Code
TV Aspect
Menu Language
Progressive Scan
PBC
Disc Audio 4:3 Letterbox
4:3 Panscan
16:9 Wide
Disc Subtitle
Disc Menu
Rating
Country Code
TV Aspect
Menu Language
Progressive Scan
PBC
Disc Audio Off
On