Getting started, Introduction, Playable discs – Dolby Laboratories HT2030 User Manual

Page 5

Advertising
background image

INTRODUCTION

5

Getting Started

Playable Discs

DVD
(8 cm/12 cm disc)

Audio CD
(8 cm/12 cm disc)

In addition, this unit can play a CD-R or CD-RW that
contains audio titles or MP3 files.

otes

– Depending on the conditions of the recording equip-

ment or the CD-R/RW disc itself, some CD-R/RW
discs cannot be played on this unit.

– This unit cannot play discs that contain data other

than MP3 or Audio CD.

– Do not attach any seal or label to either side of a disc.
– Do not use irregularly shaped CDs (e.g., heart-

shaped or octagonal).

otes on DVDs

Some DVD playback operations may be intentionally
fixed by the disc manufacturer. As a result, some play-
back features may not be available or other functions
may be added.
Refer to the instructions supplied with the DVD. Some
DVDs made for business purposes may not be played
on this unit.

About Regional Codes
This DVD+VCR is designed and manufactured
for playback of Region 1 encoded DVD software.
The region code on the labels of some DVD
discs indicates which type of DVD+VCR can
play those discs. This unit can play only DVD discs
labeled 1 or ALL. If you try to play any other discs, the
message “Check Regional Code” will appear on the TV
screen. Some DVD discs may not have a region code
label even though their playback is prohibited by area
limits.

Disc-Related Terms

Title (DVD only)
The main film, accompanying features or music album.
Each title is assigned a title reference number enabling
you to locate it easily.

Chapter (DVD only)
Sections of a picture or a musical piece that are smaller
than titles. A title is composed of one or several chap-
ters. Each chapter is assigned a chapter number to
enable you to locate the chapter you want. Depending
on the disc, chapters may not be labeled.

Track (audio CD only)
Sections of a musical piece on an audio CD. Each track
is assigned a track number, enabling you to locate the
track you want.

Remote Control Battery Installation

Detach the battery cover on the rear of the
remote control, and insert two AAA batter-
ies with the

and

symbols aligned cor-

rectly.

Caution

Do not mix old and new batteries. Never mix different
types of batteries (standard, alkaline, etc.).

Remote Control Operating Range

Point the remote control at the remote sensor and press
the buttons.

Distance: About 23 ft (7 m) from the front of the
remote sensor
Angle: About 30° in each direction of the front of the
remote sensor

1

AAA

AAA

IMPORTANT NOTE:
DEPLETED OR DISCHARGED BATTERIES MUST BE
RECYCLED OR DISPOSED OF IN A SAFE MANNER
IN COMPLIANCE WITH ALL APPLICABLE LAWS.
FOR DETAILED INFORMATION, CONTACT YOUR
LOCAL COUNTY SOLID WASTE AUTHORITY.

Advertising