ClearCube ClientCube 2 with KM - Manual (Page 4)

Page 4 of 14 P/N G0200161 Rev F, 1.5.01.19.2015
ClearCube Technology, Inc. 3700 W Parmer Lane Austin, TX 78727 (512) 652-3500 www.clearcube.com
KM cabling The picture below shows the default cabling configuration for ClientCube 2 with a KM switch. For
simplicity, cabling is shown between the KM and only one zero client. The same cabling
configuration is used for the remaining zero clients.
Figure 3. ClientCube 2 with KM, rear view and default cabling configuration (for simplicity,
cabling for only one zero client is shown)
KM Switch in ClientCube 2