Compass Atom 500 - Manual (Page 8)

Adjust so that each side has exactly the same length
M2.5x16 Shanked
Bolt x1
Use Threadlock
M2.5 x8 Self Tapping
Bolt X 4
M3x3 Set Screw x8
2.5mm Nut x1
Paddle
Main Shaft
M3x3 Set Screw
M2.5x16
Shanked Bolt
2.5mm Nut
M2.5 x8 Self Tapping Bolt
Paddle Insert
Washout Link
Thread
Flybar
Thread
Thread
Paddle Insert
0 10 20 30 40 5
Rotor,Washout & Swashplate
Pu
sh
the
Fly
bar
in
Be sure to note the correct
direction of the Flybar Paddles
as shown in the diagram. It is
very important to insure that the
Paddles are in parallel to each
other, as well as to the Flybar
Control Arm Assembly.
In this step, push the Flybar trough the
Flybar Collar, Flybar Holder and the
Flybar Control Arms using the 3x3mm
set screws to fix the Arms and Collars
onto the Flybar, care that both sides of
the Flybar are of equal length.
M3x3 Set Screw
M3x3
Set Screw
See Page Team Tips!
See Page Team Tips!