Delta RMC151 - Manual (Page 9)

Step 5: Start a New Project
5. RMC150E via USB:
A. Click USB and click Next.
B. When the RMC appears in
the list, choose it and
click Next.
RMC150E via Ethernet:
A. Click Ethernet and click
Next.
B. Use the MAC
address (on the RMC150E
label) to identify the RMC
in the list, then click the
RMC.
C. If the RMC does not have
an IP address (0.0.0.0),
click Configure Device,
choose Use the following
IP address, set the IP
Address and Subnet Mask, then click OK.
D. Click Next.
deltamotion.com 7