Jt5 operator’s manual – Ditch Witch JT5 User Manual
Page 42
Advertising
JT5 Operator’s Manual
Controls - 41
750/752 Display
CMW
3.
Channel select button
To display current channel,
press and release.
To switch channels, press
and hold.
Second function:
To start a new job, press with
Recall button.
“Init” and job number will be
displayed.
Unit defaults to last channel used
each time unit is turned on.
IMPORTANT: Make sure display and
tracker are set to the same channel.
4.
Roll stop button
This feature is not yet
available.
5.
Recall button
To see data about pipe, press
and release.
Second function:
To access second functions,
press with other buttons.
Internal: shows data about previous
pipe.
External: shows data about next pipe.
Item
Description
Notes
Advertising