Ditch Witch RT80 - Manual (Page 113)

Saw - 112
RT80Q Operator’s Manual
Operation
CMW
Normal Use
1. Fasten and adjust seat belt.
2. Start tractor. See “Start Unit” on page 74 for start-up procedures.
3. Drive to starting point. Move in line with planned trench.
4. See manufacturer’s instructions for saw operating procedures.
5. Engage parking brake.
6. Move gearbox control to 1 (low).
7. Swivel seat to the desired position.
8. Engage axle lock.
9. Lower saw to just above ground.
10. Slowly lower saw to desired depth.
11. Check that saw is in line with planned trench.
12. Release parking brake.
13. Move ground drive control to desired speed.
14. Work slowly and carefully.
15. When trench is complete, move ground drive control to neutral and adjust throttle to low idle.