Ditch Witch RT80 - Manual (Page 66)

RT80Q Operator’s Manual
Operation Overview - 65
Sawing
CMW
Sawing
1. Start unit. See page 74.
2. Position tractor and controls. See page 110.
3. Begin sawing. See page 112.
4. Complete the installation. See page 133.
5. Backfill the trench. See page 134.
6. Shut down tractor. See page 78.
Digging with Backhoe
1. Start unit. See page 74.
2. Set stabilizers and unstow backhoe. See page 114.
3. Excavate. See page 115.
4. Stow backhoe properly. See page 116.
5. Shut down tractor. See page 78.
Drilling
1. Start unit. See page 74.
2. Dig approach trench and target trench. See page 119.
3. Assemble drill string and position tractor. See page 120.
4. Begin drilling. See page 121.
5. Use drill string guide as needed. See page 121.
6. Add rod. See page 122.
7. Backream. See page 122.
8. Shut down tractor. See page 78.
9. Disassemble joints. See page 123.
Leaving Jobsite
1. Backfill if necessary. See page 134.
2. Rinse equipment. See page 134.
3. Stow tools. See page 134.
4. Haul equipment from jobsite. See page 86.