Ditch Witch SK750/SK755 - Manual (Page 24)

SK750/SK755 Operator’s Manual
Controls - 23
Gauges and Indicators
CMW
®
6. Ignition switch To start engine, insert key and
turn clockwise.
To stop engine, turn key
counterclockwise.
IMPORTANT:
• If engine does not start or stalls,
turn key to STOP and then
restart.
• Do not allow starter motor to run
continuously for more than 20
seconds.
7. Hourmeter Displays engine operating
time. Use these times to schedule service.
8. Engine coolant
temperature indicator Lights and alarm sounds
when engine coolant
temperature is too high. 1. Stop operation, set throttle to low
idle, and allow engine to cool.
2. Stop engine.
3. Check coolant level.
9. Glow plug indicator Lights when ignition switch is
on and glow plug button is
pressed.
10. Fuel tank sight window Shows level of fuel in tank. NOTICE: Use low sulfur or ultra low
sulfur fuel only.
Item Description Notes