Rinse equipment, Disconnect attachment, Stow tools – Ditch Witch SK750/SK755 User Manual
Page 51
Complete the Job - 50
SK750/SK755 Operator’s Manual
Rinse Equipment
CMW
®
Rinse Equipment
1.
Spray water onto equipment to remove dirt and mud.
2.
Open hood and allow unit to cool. Remove debris from inside of unit.
3.
Remove mud from track sprockets.
4.
Wash undercarriage. Pay special attention to brake pin area.
Disconnect Attachment
1.
Lower attachment to the ground.
2.
Turn off engine.
3.
Disengage lock pins by turning handles away from center of attachment.
4.
Cycle attachment drive control and disconnect hydraulic hoses, if used.
5.
Start engine.
6.
Tilt mount plate forward and back unit away from attachment.
Stow Tools
Make sure all tools and accessories are loaded and properly secured on trailer.
NOTICE: Do not spray water onto operator’s console. Electrical components could be damaged.
Wipe down instead.