Unload, Sk850 operator’s manual – Ditch Witch SK850 User Manual
Page 59
Advertising
Transport - 58
SK850 Operator’s Manual
Haul
CMW
®
Unload
1.
Prepare trailer and ramps for unloading.
2.
Remove tiedowns.
3.
Start engine.
4.
Disengage parking brake.
5.
Pull lift arm control to raise mount plate (and attachment) off ground, but keep it low.
6.
Adjust throttle to low speed and slowly back unit down trailer or ramps.
Crushing weight. If load falls or moves it could kill or crush
you. Use proper procedures and equipment or stay away.
To help avoid injury:
•
Load and unload trailer on level ground.
•
Attach trailer to vehicle before loading or unloading.
•
Only operate unit from operator platform.
•
If unloading from tilt-bed trailer, be prepared for trailer to tilt.
Advertising