Echelon IP-852 Channel - Manual (Page 18)

10 Creating an IP-852 Channel
14. Click the i.LON Time Zone tab, and then set the time zone to correspond with the
geographical area of the device.
15. Click Apply.
16. Repeat steps 6 – 15 for each IP-852 device to be added to the IP-852 channel. You
can change the IP-852 device’s settings (for example, IP address, local port, and so
on) later. When you modify IP-852 device settings, update the device’s configuration
with the device software before modifying the device’s settings in the IP-852
Configuration Server. The IP-852 Configuration Server must be running
when you modify the device’s configuration with the device software. You
can keep the IP-852 Configuration Server running at all times.
17. Either click Channel and then click Update Members, or click Device and then
click Update Device. The IP-852 Configuration Server automatically attempts to
set up the device's routing tables by updating all members of the channel with the
current channel configuration and membership.
Figure 2.6 IP-852 Configuration Server: Update Members and Update Device
When you select Update Members or Update Device, a communication process starts
between the IP-852 Configuration Server and the IP-852 devices that you added to the
IP-852 channel. You can view this process by clicking Show Log.
Figure 2.7 Log Dialog