Echelon IP-852 Channel - Manual (Page 22)

14 Creating an IP-852 Channel
Figure 2.9 Add Network Interface Wizard Dialog
4. Enter the following properties for the IP-852 interface:
Name Enter a name for the IP-852 interface definition that is unique
to your computer.
IP Address /
Hostname
IP Address Enter the IP address to be used by the IP-852 interface
definition on your computer.
Each IP-852 interface definition must use a unique IP
address/port combination. This property defaults to the IP
address of your computer's IP network card. If your computer
contains multiple network cards, select the IP address from the
list box that appears.
You can also manually enter an IP address that is not already
defined on your computer. In this case, a warning icon appears
next to the IP Address property; however, you can still enter
the non-defined IP address for the IP-852 interface definition.
The non-defined IP address is marked by "***".
Note: The IP-852 interface definition is not functional until the
IP address has been defined on your computer.
Port Enter the port number to be used by the IP-852 interface
definition on your computer. The default port is 1628.