Echelon Rapid Deployment Example for EES - Manual (Page 20)

10 Using the Rapid Deployment Example
5. Click Import. It takes approximately 1-2 minutes to complete the import. When the import is
done, DONE is displayed under the Progress column.
6. You can expand the Templates icon to display the imported QSR-TEMPLATE folder, and then
expand the LAN to display the SmartServer image in the template. If you imported the QSR-
TEMPLATE-LonMaker.zip file, the QSR-TEMPLATE folder also includes an LNSProxy
icon that you can expand to view the QSR LNS network database included in the template.
Note: If you imported the wrong QSR-TEMPLATE, delete the template from the i.LON AdminServer
(right-click the QSR-TEMPLATE and click Delete on the shortcut menu), delete the backup file in
the L
ON W ORKS \iLON\EnterpriseServices\repository\ees-import\templates folder on your
computer, and then follow steps 3-5 to import the other QSR-TEMPLATE.
Deploying the i.LON Template
You can deploy the i.LON template you imported in the previous section. After the i.LON template is
deployed and the target SmartServer is rebooted, the target SmartServer will automatically discover the
Neuron IDs of the uncommissioned devices on your demonstration network, match the devices with
the devices defined in the deployed SmartServer or LNS network database based on program ID, and
then automatically commission the devices—all with no further user-interaction required.
To deploy the i.LON template, follow these steps:
1. If you want to preserve the current image on your SmartServer for later use, use the i.LON
AdminServer to create an i.LON project and then back up your SmartServer. For more
information on how to do this, see Chapter 2 of the Echelon Enterprise Services 2.0 User’s Guide.
2. Verify that the all L ON W ORKS devices on the demonstration network are uncommissioned.
3. Right-click the QSR-TEMPLATE folder, and then select Deploy on the shortcut menu.