Technical specifications eci 6ds, Rated output power, Dimensions – Electrocompaniet ECI 6DS User Manual

Page 17

Advertising
background image

17

ENG

Technical specifications ECI 6DS:

The following technical data were measured on randomized test objects

and are typical data. All measurements are made at 120V / 240V //

50Hz / 60Hz. Clipping point of the amplifier is set to a level where

total harmonic distortion (THD) is 0.2 %.

Preamplifier section

Input impedance (Balanced input)....................................... 47 kOhm

Noise floor (1Vrms, 20 - 20 kHz, balanced)....................... < -135 dB

THD + N (1Vrms, 20 - 20 kHz, balanced) ......................... <0,003%

Gain (Balanced)................................................................... ...0 dB

Amplifier section

Output Impedance ........................................................< 0,02 Ohm

Frequency response (- 3 dB)............................................1 – 150 kHz

Channel separation........................................................> 120 dB

THD + N (20 - 20 kHz).................................................< 0,004%

Maximum peak current...................................................>100A

Damping factor (8 ohm load)..........................................>350

Input sensitivity (125W output)......................................1.3Vrms

Input sensitivity HT (125W output)....................................1Vrms

Gain HT (input)..............................................................31dB (x36)

SPDIF inputs.................................................. 2 x Coax, 2 x TOSLink
USB......................................................................1x 192kHz/24bit

Rated output power

10 % change in line voltage will give approximately 20 % change in

output power.

8 Ohm..........................................................................2 x 125 W

4 Ohm..........................................................................2 x 200 W

2 Ohm..........................................................................2 x 370 W

Power consumption (no load or signal)...................................110 W

Standby....................................................................................1W

Dimensions

Width: 483 mm - 19 inch

Depth: 405 mm - 16 inch

Height: 135 mm - 5,3 inch

Weight: 20 Kg - 44 lbs

*Specifications are subject to change without further notice.

Advertising