Electrocompaniet EMC1-UP - Manual (Page 3)

4
Set up procedure
How to remove and UN secure transport necessities.
1. Remove the two wing bolts and
the wing nut located underneath the
unit.
2. Unscrew the Allen screws hol-
ding the gold sign marked
«Mechanical Cancellation Sys-
tem» with the smallest Allen key
and remove the bracket.
3. To loosen the transport screw
located underneath the golden
sign, use the largest Allen key and
unscrew counter clockwise for
about 10 turns. Do not remove this
allen screw.
4. Put the gold sign back and fasten
it whith the Allen screws.
! Important!
Keep Allen keys and all transport
necessities in a safe place for
future use. Always tighten the trans-
port screw ontopp first, then the wing
nut and wing bolts when moving the
CDPlayer. The cancellation system
weights close to six kilograms
alone. If not securely fastened, the
CD player will be severely
damaged, resulting in void of
warranty. Do not over-tighten the
transport screw.