Electrocompaniet ECC 1 - Manual (Page 3)

Unpacking the ECC-1
Immediately upon receipt of the ECC-1, inspect the carton for possible damage during
shipment.
The carton and packaging have been designed to provide the safest possible protection
during transport of your product. Unpack the unit carefully. Save all packaging materials
for future shipment.
The contents of the carton
1 piece Electrocompaniet ECC-1
1 piece AC mains cord.
1 piece inspection card.
1 piece user manual
If anything is missing or any transport damages is discovered, please contact your dealer
for assistance.
Send also a report to
[email protected] with all the information from the
inspection card. Please include model, serial no, packaging information and person
responsible for final inspection in your e-mail. This is part of our quality system and this
information helps us to continuously improve our quality control.
Set up procedure
Before connecting the ECC-1 to the mains, check that the main voltage indicated on the
rear panel corresponds to the line voltage in the territory where you intend to use the unit.
How to avoid damages
Do not under any circumstance connect or disconnect equipment when power is turned
on.
The design of the RCA plug generates a huge transient when inserted.
Connecting or disconnecting equipment with the power on can result in severe damage to
both speakers and amplifier.
How to avoid noise problems
The ECC-1 contains delicate circuits that are sensitive to magnetic stray fields.
The unit should not be placed near main transformers, TV sets, etc. Care should also be
taken regarding placement of the interconnect cables. Do not run interconnect cables in
parallel with main cords or speaker cables. Keep interconnect cables as short as possible.