Electrocompaniet ECC 1 User Manual

Page 6

Advertising
background image

Important Notice

For optimal sonic performance, the ECC-1 should be burned in for a minimum time of 72
hours.
If the ECC-1 has been switched off, allow two hours of warm-up for optimal sonic
performance.
Proper ventilation is important.
Never cover the ventilation area.
A good rule of thumb is to allow at least 3 - 5 cm (1 - 2 inches) of air sidewise,
and 5 – 8 cm (2 - 3 inches) above the ECC-1.
If service is needed

Your dealer will have all relevant information regarding the service centre in your area
and will ensure that your unit is serviced with minimum delay.
It is our general policy to have your unit returned to you within five working days.
This is an average time and can vary locally, depending on the workload at that particular
service centre.
If, for some reason, there are no service facilities available in your country, please ship the
unit to the following address:

ELECTROCOMPANIET AS,

BREIVIKVEIEN 7,

4120 TAU,

NORWAY

E-mail: [email protected]

Web: www.electrocompaniet.no

Service department:

[email protected]

When shipping a product to the factory for service, always include the following:

1. A sales slip or other proof of purchase if repair is claimed under warranty.
2. A proforma invoice with value of goods, stating that the amplifier is being returned to

Norway for repair.

3. An accompanying letter describing faults, symptoms, or problems with the unit.
4. Always ship the unit in its original carton and packaging material to prevent damage in

transit. Electrocompaniet will not cover damages incurred in transit.

If you require further information concerning the operation of the unit or if you have any
questions related to service, please do not hesitate to contact your dealer or national
distributor.

Advertising