EmberGlo ES10 - Manual (Page 4)

4
Generator: The cavity in the generator casting may accumulate lime and can be cleaned by
scraping or wire brushing. Do not remove all of this deposit since a thin coating improves
steaming.
Water Nozzles: The water nozzles may be pulled out for cleaning. Clean small holes and inside
of nozzle tube. Located in the nozzle tube is a tool to be used for cleaning the holes in the water
tube.
Water Inlet: If the nozzle socket tube through the generator is limed, remove plug at bottom and
push lime out with a wire or small rod.
Strainers: To wash strainer located in hose; first, remove hose from steamer. Remove quick
connect fitting from hose. Run water through hose in reverse direction. Return to original
connections.
There is a strainer in inlet of solenoid valve that normally does not require cleaning but under
extreme conditions may have to be removed and cleaned.
____________________________________
Maintenance
As Required
ES10 Series Installation and Service