EMM Labs PRE2-SE - Manual (Page 15)

015 Operational Features PRE2 STEREO PREAMPLIFIER OWNER’S MANUAL
Programming Menu
2. Input Naming Menu (cont’d)
• DASH, PERIOD, and SLASH characters
• digits 0-9.
Rotating the Volume knob scrolls through the characters. Pressing one of Input Selector buttons shows the current name
of the input, and allows the name to be edited. The name being edited is stored only by pressing the ‘SAVE’ button on this
screen. Pressing another input button or selecting a different/same input discards the changes. Pressing the ‘Quit’ button
returns you to the ‘Programming Menu’ page, discarding any changes made.
3. Volume Display Units
The screen shows a sample value of the Volume display.
The ‘Change Units’ soft button toggles the Volume
display units to the following two options:
• Volume Step
• Gain in [dB]
The Volume knob is active and you can change the
sample value. The actual Volume (signal gain) is not
affected. The Volume display unit selected is stored only
by pressing the ‘SAVE’ button. Upon ‘EXIT’ after ‘SAVE’
the main screen will display the selected Volume display
unit. Pressing ‘EXIT’ without pressing ‘SAVE’ discards any changes.
© 2014 EMM Labs Inc., All Rights Reserved. EMM Labs reserves the right to amend specifications & design without notice.