EMM Labs PRE2-SE - Manual (Page 7)

007 Features & Specifications
Features & Specifications
S/N ratio: 110dB (A-weighted)
THD: 1kHz <0.01%; 20kHz <0.01%
Frequency range: 0Hz-100kHz
Gain control range: Better than 62dB
Maximum output level: +/- 11V p-p (+26 dBu)
Maximum input level: +/- 7V p-p (+22 dBu)
System Gain: +12dB
Analog Inputs:
• 2 Stereo sets of Balanced (XLR) - Input Impedance: 20kΩ
• 4 Stereo sets of Un-Balanced (RCA) - Input Impedance: 10kΩ
• 1 Stereo Loop Input Un-Balanced (RCA) - Input Impedance: 50kΩ
Analog Outputs:
• 1 Stereo set of Balanced (XLR) - Output Impedance: 150Ω
• 1 Stereo set of Un-Balanced (RCA) - Output Impedance: 75Ω
• 1 Stereo Loop Output Un-Balanced (RCA) - Output Impedance: 300Ω
System:
• System control via serial RS-232
• Software upgradeable
Power Consumption Max: 40W
Dimensions W x D x H: 435 x 400 x 92mm, Weight: 12kg
PRE2 STEREO PREAMPLIFIER OWNER’S MANUAL
© 2014 EMM Labs Inc., All Rights Reserved. EMM Labs reserves the right to amend specifications & design without notice.