Eurocom P170HM Neptune - Manual (Page 148)

Modules
7 - 22 Wireless LAN Module
7
Wireless LAN Module
If you have included an Intel® or 3rd Party 802.11b/g/n WLAN module in your
purchase option, make sure that the Wireless LAN module is on before installing the
driver.
Use the Fn + F11 key combination to toggle power to the Wireless LAN module.
When the WLAN module is powered on the indicator
will briefly be displayed.
Make sure you install the drivers in the order indicated in Table 4 - 1, on page 4 - 3 .
The operating system is the default setting for Wireless LAN control in Windows 7.
Wireless should be turned ON in the Windows Mobility Center to ensure proper
wireless function key behavior (see
“Wireless Hot Keys” on page 7 - 41 ).

Wireless Device
Operation Aboard
Aircraft
The use of any portable
electronic transmission de-
vices aboard aircraft is usu-
ally prohibited. Make sure
the module(s) are OFF if
you are using the computer
aboard aircraft.
Use the Fn + F11 key com-
bination to toggle power to
the WLAN module, and
check the LED to see if the
module is powered on or
not (see
Table 1 - 4, on
page 1 - 11 / Table 1 - 2, on
page 1 - 9 ).