Eurocom P170HM Neptune - Manual (Page 198)

Modules
7 - 72 3.75G/HSPA Module
7
9. Click the newly created profile in the profile window and then click Default (button)
to set the profile as the default connection (note that only one profile may be stored
as the default connection).
10. The newly created profile will now be stored as the default connection when you
click Connect in the Connection Manager Home screen.
11. To use a profile click to select it, and then click Apply (button) and the settings will
be transferred to Connection Manager.

New SIM Card
If you switch to a differ-
ent SIM card, then the
default profile will no
longer be valid. You will
need to create a new
profile as described
here. If you do not have
access to all the infor-
mation necessary to
create a new profile you
should uninstall the
BandLuxe software and
then reinstall it. The new
default profile should
obtain the information
from the SIM card.
Figure 7 - 51
Profile Set as
Default