Eurocom L29xN All-in-One LCD PC - Manual (Page 40)

Advanced Controls
2 - 8 Display Modes
2
To Enable Intel(R) Dual Display Clone Mode
1. Attach your external monitor to the external monitor port, and turn it on.
2. Go to the Intel (R) GMA Driver for Mobile control panel (see “Intel Graphics
Properties” on page 2 - 3 ).
3. Click to choose Intel(R) Dual Display Clone or Twin from Display Device (tab).
4. Click Apply, and OK to confirm the settings change.
5. Click Display Settings to adjust the settings for the attached devices.

Twin Mode Support
The Twin mode option
will only appear if the
LCD PC (notebook) and
external monitor support
the same resolution
(e.g. 1280 * 800). Check
any documentation sup-
plied with an external
monitor to see support-
ed resolutions.
Figure 2 - 6
Display Devices &
Settings
Clone Mode
Twin Mode