Eurocom L29xN All-in-One LCD PC - Manual (Page 72)

BIOS Utilities
4 - 4 The Setup Program
4
The Setup Program
The PhoenixBIOS Setup Utility tells the system how to configure itself and man-
age basic features and subsystems (e.g. port configuration).
Entering Setup
To enter the PhoenixBIOS Setup Utility, turn on the computer and press F2 dur-
ing the POST. The prompt (Press F2 to Enter Setup) seen in
Figure 4 - 1 is usu-
ally present for a few seconds after you turn on the system. If you get a “Keyboard
Error”, (usually because you pressed F2 too quickly) just press F2 again.
If the computer is already on, reboot using the Ctrl + Alt + Delete combination
and then hold down F2 when prompted. The PhoenixBIOS Setup Utility main
menu will appear.