Eurocom L29xN All-in-One LCD PC - Manual (Page 46)

Advanced Controls
2 - 14 Power Management
2
Power Management
The computer uses the ACPI power management system to conserve power by con-
trolling individual components of the computer (the monitor and hard disk drive) or
the whole system.
Using some form of power management greatly increases the life span of the
LCD.
When the computer is on, you can use the power button as a Standby/Hibernate/
Shutdown hot-key button when it is pressed for less than 4 seconds (pressing and
holding the power button for longer than this will shut the computer down). Use
Power Options in the Windows control panel to configure this feature.

Shutdown
Note that you should
always shut your com-
puter down by choos-
ing the Shut Down/
Turn Off Computer
command from the
Start menu in Win-
dows. This will help
prevent hard disk or
system problems.
Forced Off
If the system “hangs”,
and the Ctrl + Alt + Del
key combination
doesn’t work, press the
power button for 4 sec-
onds, or longer, to
force the system to
turn itself off.