Eurocom L29xTP; TouchScreen PC - Manual (Page 30)

Concise User’s Guide
24 - Driver Installation
English
802.11b/g Wireless LAN (WinXP)
If your purchase option includes the 802.11b/g Wireless
LAN module, you will be provided with the appropriate
driver CD for your module. Follow the procedure below
to install the driver.
1. Insert the WLAN CD-ROM into the CD/DVD drive.
2. Click Start (menu) > Run ...
3. Navigate (Browse..) to D:\SETUP.EXE and click OK.
4. Click Next > Next (click Continue Anyway if a
Hardware Installation warning appears).
5. Click Finish.
6. The settings can now be configured. The Wireless
Configuration utility may be run from the Start menu
(Start > Programs/All Programs > Wireless LAN
Utility > SISCFG), or may be accessed from the icon
/ in the taskbar.
Changing the WLAN Control Setting in WinXP
The operating system is the default setting for WLAN
control in Windows XP. It is recommended that you
switch to use the Wireless Configuration to control
your WLAN connection.
1. Double-click the WLAN icon / in the taskbar and
click Site Scan (tab).
2. Click to remove the tick in the tickbox “Use Windows XP
to configure my wireless network settings”.
3. Click Re-Fresh (button) to see any available networks.
4. Click to select an access point from the list, then click
Connect (button) to connect to the wireless network.
Figure 13 - Wireless Configuration