Eviant T10 Series - Manual (Page 14)

- 9 -
Display Options & Channel Setup (continued)
Option
Press the ▲▼ buttons to select option and press the ► button to enter.
Press the ▲▼ buttons to select Mode, Font Style, Font Edge Style, Font
Edge Color, FG Color, BG Color, FG Opacity or BG Opacity. Press ◄ ►
buttons to set these options.
Note: This selection is only available under ATSC signal.
Restore Default
Press the ▲▼ buttons to select Restore Default.
Press the ► button to enter the submenu.
To reset all settings to factory defaults, press ◄ ► buttons to select “YES”
and then press
▲ or▼ button to confirm.
Caution: This operation will reset all settings and channels.
To keep current settings, select “NO” and press the ▼ button to return.
Lock Menu
Press the ◄ ► buttons to select
Press the ▼ button and input the password to
enter.
Press the ▲▼ buttons to select the desired
sub-menu.
Note: Default password is “0000”.
Change Password
Press the ▲▼ buttons to select Change Password.
Press the ► button to enter, input the old password, and then input new
password and confirm it again.
System Lock
Press the ▲▼ buttons to select System
Lock.
Press the ◄ ► buttons to select On or Off.
Note: When system lock turn on，it will ask
to input password for unrated channel.
Default password is “0000”.