Eviant T10 Series - Manual (Page 7)

- 2 -
Getting Started (continued)
Antenna
The TV unit is supplied with a telescoping antenna that will provide good
reception in most situations. Be sure keep the TV stationary when trying to
receive a signal, any movement of the TV can result in loss of the digital signal.
Note: You can also connect your own antenna cable connected to any suitable
TV antenna or cable system to improve reception. For cable TV, see page 10
for setting the antenna option to Cable.
Your Eviant T10 is also supplied with an
external antenna that can be located a short
distance away from the TV to improve
reception.
Simply remove the telescoping antenna by
positioning the antenna vertical to the TV and
gently pull up. Insert the external antenna
plug and position the antenna for best
reception.
Using AC Adaptor
The TV unit is supplied with a 120V AC Power Adaptor for charging the internal
battery and for powering the unit. Plug the adaptor into the wall socket and plug
the small DC plug into the DC jack adjacent to the power switch.
Using DC Adaptor
The TV unit is supplied with a Car Adaptor for charging the battery in a vehicle.
To Use: Connect the car adaptor into the 12V cigarette lighter socket in a
vehicle.
Attention
¾ Do not operate the unit or view video software while driving a vehicle.
¾ Place the unit in a proper position for viewing.
¾ Unplug the unit from the Car Adaptor when starting the vehicle.
About Rechargeable Battery
Your portable TV device comes with a built-in rechargeable Lithium-Ion battery.
Charge the battery fully before initial use. Charging time is normally about 3.5
hours. A fully charged battery delivers about 2 hours to use.
• When charging the battery, the charge indicator will turn red light. When
charging is complete, the light will turn blue.
• When the battery is weak, an indication symbol will appear on the LCD
screen and the unit will power off automatically after a few minutes.