Eviant T10 Series - Manual (Page 9)

- 4 -
Getting Started (continued)
PUSH
OPEN
If the remote controller does not operate properly, you may need to replace the
battery. When the remote controller is not being used for extended periods of
time, remove the battery to avoid possible damage from battery leakage.
Caution: The remote control uses a CR2025 button battery. Do not recharge,
disassemble, or heat the battery. Misuse of the battery may result in leakage
that will damage the remote control.
Remote Control Bracket:
Install the bracket on the rear of
the TV in the slots provided.
Slide the remote control in the
bracket when not in use.
External DVD or VCR Connection
You can also use the TV to display a program
using a DVD player or VCR.
Use the included AV cable and connect as
shown.
Pay careful attention to the color codes.
Yellow is for the video signal.
The Red and White plugs are for the audio right
and left.
Note: To change from broadcast TV mode to
external Audio/Video mode.