EXFO RTU 310-310G IP Services Test Head User Manual
Page 191
Advertising
Stream Generation Tabs
Ethernet and Fibre Channel Application
179
MAC
VLAN
Note: For RFC 2544 test, VLAN is only configurable through the Network on
Note: Enabling/disabling VLAN will affect the Data Link value (see Overview on
Enable: When enabled, allows the configuration of VLAN. This
setting is disabled by default.
VLAN #1 (C-VLAN) / #2 (S-VLAN) / #3 ID (E-VLAN): Indicates the
VLAN ID for each enabled VLAN layer. Possible values are 0
through 4095. The value 4095 is reserved while 0 and 1 have
specific utility.
VLAN Config.: Allows VLAN parameters configuration. Refer to
VLAN Configuration on page 486 for more information.
Advertising