EXFO IQS-8100 Series Transport Blazer for IQS-600 User Manual
Page 696
Glossary
682
IQS-8100 Series Transport Blazer
Next-Gen - Link-Capacity Adjustment Scheme (LCAS)
³
Member Permanent Removal
The bandwidth of a VCG can be permanently reduced using the
LCAS’ ability to enable in-service removal of one or more
member(s) from the VCG. This bandwidth reduction is controlled
by the user via a network management system. The steps detailed
in figure below are used to perform this reduction of bandwidth.
Bandwidth Reduction (Permanent Removal)
Note: The removal of a member must be done at the source in order for the
operation to be hitless. If it is done at the sink first, the traffic will be
corrupted from the time the member is removed (sink generates
MST = FAIL) and the sink receives a DNU generated from the source.
³
Step 1: One or more member(s) need to be removed from an
existing VCG. In this example, again we are using STS-1 [3,2], AU-3
[3,2].
This operation must be initiated from a management system.