E-Z-GO FREEDOM TXT 2+2 - Manual (Page 25)

17
OPERATING PROCEDURES
Read all of this manual to become thoroughly familiar with this vehicle. Pay particular attention to all Notices, Cautions, Warnings, and Dangers.
OPERATING PROCEDURES
SERIAL NUMBER LOCATION
Two serial number and manufacture date code plates are on the vehicle. One (PART C) is placed on the body below
the front, driver side of the seat, PART D is placed on the frame weld tube. The other (PART A and PART B) is located
on the crossmember section of the chassis on the driver side (seat back support). To access it, raise the seat and lift up
the flap on the access panel.
Design changes take place on an ongoing basis. In order to obtain correct components for the vehicle, the manufacture
date code, serial number and vehicle model manufacture date code, and vehicle model must be provided when order-
ing service parts.
V
P
A
RT B
P
A
RT C
/D
P
A
RT A
Part C
Lift Flap on Access Panel
Serial Number
Labels
Part A
Part B
Part D
V